Technology:     

 

E-Pwr. Solar TRIFACIAL SOLAR PANEL SYSTEM

Our system can generate electricity independently and cover residential, agricultural, office, and industrial structures partially or completely, meeting current green energy standards. Wind power can be equally effective, particularly along coastlines. We are finalizing a turbine wind generator to add a fourth power source to our roof system, with E-Pwr. Turbines as standalone units.

Additionally, we are developing a mobile or stationary Battery-on-Wheels pod system for power needs like battery storage, mobile lighting, refrigeration, water purification, and welding, enhancing security and emergency power options.  

 

Pwr. Solar offers many valuable features, such as:

• A permanent weatherproof solar panel covering roof structures, lasting 50 years or more.

E-pwr. Solar’s unique system consists of a dual combination of energy producers when applied as one roof covering. The lower roof, formed of metal or plastic ‘Hi Rib style’ is completely weatherproof, offering a product to last more than 50 years by itself. The upper solar panel ‘roof’ with its dual generating ability, a bifacial solar panel, is attached to permanent support and becomes the top roof panel system. Under this top panel is an additional solar panel lying on the metal roof below. A choice of reflective surfaces embedded to either side of the lower solar panel receives redirect ‘pass-thru’ sun rays. Rays then bound off the reflective surfaces upward toward the underside of the top bi-facial panel creating energy.

• Two distinct solar panels produce electrical power from ‘three’ faces.

Rays hit the top panel surface to generate power. Those that pass through are reflected to the underside for additional power generation. This bi-facial solar panel is horizontally anchored to the structured roof in the E-Pwr. system. Power from the backside surface varies based on conditions like distance between surfaces (Albedo), angle of rays, and time of day. The lower panel also generates power from direct rays. Unspent rays convert to heat, potentially breaking down the system. The E-Pwr. system dissipates most of this heat, preserving its quality over time.

• Plywood sheathing, waterproof membrane and all finished roofing materials.

All the above materials are eliminated under this system. E-Pwr. System is designed to rest between joists, rafters and bearing members saving major costs of material labor and time. Anchor strips over, bearing members for smaller panels create an allowable walking-on surface. This roof system has no combustible material to ignite. (Great for Northern California fire areas)

• Standard construction spacing for bearing members.

Our suggested width sizes of solar panels for residential and office applications are designed for the panel bearing members to be spaced according to standard Universal Building Codes starting from 24” up to 36” on center. This standard has been used for years worldwide on new and older structures and will continue in the future, especially for lower cost buildings and structures. This width is also easier to handle during installation. E-Pwr. Solar panels can “drop in” alongside any existing type of roofing or can become the finished roof product on its own. Our system will remain intact, in place, when many other ‘top of’ existing roofing systems require replacing.  E-Pwr. Solar will lower O&M costs over the life of a system, resulting in significant savings compared to other systems.

• Non-metallic anchoring rails.

There are several methods to anchor solar panels depending on the panel itself. Panels installed over existing roofing have a variety of future problems that will require extensive labor to uninstall and then reinstall after the overall new roofing is installed. High winds and vibration flexing require stronger methods over our continuous method of permanently anchoring. Lost time and loss of power during replacement mean loss of income (ROI). Our non-conductive continuous anchor system not only secures each panel from extreme wind conditions but is easily removable to replace any panel individually. The anchor strip does not require grounding against lightning strikes and offers a ‘walkable’ portion to step on the 24” panels. As such, panels are easy to reach without having to stand on the solar surface.

• Rapid installation of panels and anchor rails.

The installation of wider panels requires careful handling to avoid damage. Many current installation systems employ metal anchoring methods that penetrate the roofing surface, necessitating thorough sealing of holes, wires, and other exposed components to prevent leaks. E-Pwr. Solar offers simplified, cost-effective, and safer installation methods that facilitate the process without requiring electrician expertise.

• Efficient maintenance for repair and cleaning.

Standard 24” panels for housing are narrower and more manageable. As mentioned earlier, one can easily access the 24” rails to remove anchors or damaged panels or to clean the panel surfaces. A dust collection or washer system will be designed to access the Albedo or inside area for cleaning the lower panels. Accumulated dirt on panels can significantly reduce electrical generation by up to 20%, particularly in arid climates with minimal rainfall.

• Heat management through ventilation.

Effective heat management is crucial for maintaining the efficiency and longevity of a solar system. Each starting panel incorporates a venting screen at the lower metal roof panel end, allowing cooler external air to flow through and ascend within the duct passageway. This air combines with heated air from unused solar rays, which then rises to be exhausted at the top of the system. At this point, the heated air can be vented to the outside or utilized via a fan system, if installed, for additional heating purposes within a structure.

• Durability against elements, including wind loads exceeding 180 MPH.

E-Pwr. Systems are securely anchored to bearing members that utilize approved earthquake and metal connectors in compliance with Code requirements. This ensures the system's resilience against harsh environmental conditions. The narrower panels are expected to exhibit greater durability than wider ones. It is not recommended to install bifacial solar panels directly over existing roofs with minimal spacing. The increased cost to manufacture may not yield the desired effect due to greater heat accumulation.

• Buildup of matter and weathering of electronic components under panels.

E-Pwr. Solar has no wires, metal connectors or electrical components to be ‘sandwiched’ above the existing roof or between the solar panels and finished roof surfaces. Leaves, vermin, algae, wear from excessive heat and leaking roofs from bad installations are now a thing of the past. Again, our system does not have to be removed at roof replacement time as most others do.

• Hot water circulation available.

A one-piece copper coiled tubing manifold system for re-circulation of heated water can be installed on the lower pan surface at the time of panel installation in place of the lower solar panel. Circulation and free heating of water can be included. Also, heated water for inside control of the contained environment and an operating HVAC system are now possible. These could be beneficial to the health and comfort of occupants. Once panels are installed, it would be at greater expense to add a simple water manifold.

 

 

 New and retrofit solar roof systems.

Our system is designed for seamless installation during new construction, covering the entire roof or specifically the garage area outside the building envelope. One significant advantage of the E-Pwr. system when retrofitting existing old roofing with bearing members at 24” on center is its ease of installation by simply removing all material supported by rafters. The E-Pwr. system will fit effortlessly between the rafters without requiring additional workers on the roof for installation, anchoring, wiring, or adding electrical fixtures, thus preventing potential damage to the roof and vents. This approach results in both a new roof and a long-lasting solar system.

 

Patented for protection

We secure exclusive and proprietary control through patents, with the E-Pwr. system as our foundational patent. We anticipate incorporating multiple features into the E-Pwr. system in the future for global use. Imagine residing in a home that offers comfort, clean energy, and low maintenance for life. This would truly be a modern day castle, ready to accommodate an all-electric vehicle in the future, epitomizing affordable home ownership.

 

Additional freedom from the grid or support is now possible

California law now mandates solar panels for emergency purposes on all new construction, with limited exceptions. In fire hazard areas, a fireproof roof integrated with solar panels, storing power in batteries for independent supply when needed, would be ideal. This setup facilitates selling surplus electricity after meeting personal needs. Over time, the generated power could potentially offset the cost of the home, offering years of enjoyment and utility. Therefore, why rent?